Where Can I Download Software for Tasco Trail Cameras Updated FREE
Where Can I Download Software for Tasco Trail Cameras
Tasco Trail Camera Education Transmission 119270CW/119271CW
Of import NOTE
Congratulations on your purchase of 1 of the best trail cameras on the market! Please refer to the notes below and the instructions in this transmission to ensure that
yous are completely satisfied with this product.
If your Tasco® Trail Camera does non seem to exist operation properly or if you are having photo/video quality bug, please cheque the Troubleshooting/
FAQ section on pages 13-sixteen.
Problems are often due to something simple that was overlooked, or require only changing one setting to solve.
If your problem continues later trying the solutions in the Troubleshooting/FAQ department, please phone call Tasco Customer Service at (800) 423-3537. In Canada, call
(800) 361-5702.
Tasco recommends using eight Energizer® Lithium AA batteries in this trail photographic camera to obtain maximum battery life.
Do non mix old and new batteries. Do not mix battery types-apply ALL lithium or ALL alkaline. Rechargeable batteries are NOT recommended.
Tasco recommends using SanDisk® SD and SDHC Cards (upwards to 32GB chapters) in this Tasco trail photographic camera.
INTRODUCTION
Most the Tasco Trail Camera
Your new Tasco® Trail Camera is a digital scouting camera. It tin exist triggered by any movement of live animals in a location, detected past a highly sensitive Passive Infra-Red (PIR) motion sensor, and so accept loftier quality photos (6MP
or 8MP resolution, depending on model), or video clips (720p, x seconds length).
The Tasco Trail Photographic camera consumes very piddling power (< 0.5mA) in a stand-past (surveillance) state. This means it can evangelize upward to half-dozen months stand up-by operation time when the device is powered by eight AA alkaline batteries, and upwards to twelve months utilizing 8 lithium AA batteries (30 images per day, xv w/wink).
In one case movement in the monitored expanse is detected, the digital camera unit will be triggered at one time (typically less than 1 second) and then automatically take photos or videos (your choice). The Tasco Trail Camera is equipped with congenital-in infrared (IR) LEDs that function as a wink, so that it delivers articulate photos or videos (in black & white) fifty-fifty in the night, and it can take color photos or videos under sufficient daylight. The Tasco Trail Camera is designed for outdoor utilize and is water resistant.
PARTS and CONTROLS
Release the ii latches on the right side of the camera and swing the front cover over to the left to access the controls. A three-way power/mode switch is used to select the main operating modes: OFF, AIM, and ON (Fig. 1)
When the power switch is ready to the AIM heart position, the camera is in Setup Fashion. The AIM position can likewise exist used to verify the area the camera will monitor. The LCD Brandish volition show the camera'southward electric current settings in Setup Manner. The Upward, Downward and OK keys are used to ready the engagement and fourth dimension (to be imprinted on each photograph/video), alter the interval or "detection delay" fourth dimension between images while an animal remains in range of the camera's sensor, select Photo or Video capture fashion, fix a photographic camera ID number for your reference, and format the SD bill of fare (erase all files). Once you lot setup the camera, switch information technology to ON for normal operation.
Fig. 1
INSTALLING BATTERIES and SD CARD
Before you begin to use your Tasco Trail Photographic camera, you will first demand to install a gear up of batteries and insert an SD card. Although that may simply take you a minute, at that place are some important notes about both batteries and SD cards you should exist enlightened
of, and then please take the time to read the post-obit directions and cautions:
Loading Batteries
Press the Battery Tray Eject Push to release the battery tray and pull it out for loading (Fig. 2). Switch the camera'south power OFF when loading/unloading batteries. Exist sure to insert each battery and so its polarity (+/- direction) matches the polarity
indications at the lesser of the battery tray.
The photographic camera is capable of operating with only 4 batteries installed if necessary, but a full set of 8 batteries should ordinarily be used to ensure the longest operating fourth dimension. Tasco recommends using 8 new lithium AA (Analeptic® brand) or alkaline AA batteries. NiMh Rechargeable batteries tin can also be used, just they might accept a shorter life span due to their reduced efficiency over time and at low temperature.
Inserting the SD Card
The Tasco Trail Camera uses a standard SD (Secure Digital) retentiveness card to salve your photos (.jpg format) or videos (.avi format). SD and SDHC (Loftier Capacity) form 4 or higher speed cards, upward to a maximum 32GB are supported.
- Make sure that the write-protect switch on the side of the carte is "off" (Not in the "Lock" position). With the power switch in the OFF position, insert the SD card in the slot on the lower right side of the camera (Fig. 3) until information technology clicks
in place. If the wrong side of the card is facing upward, yous will not be able to insert it without force-there is but one correct way to insert cards. - If the SD menu is not inserted correctly, or no card is in the slot, "Carte" will announced on the LCD Display, and the camera will non operate (Fig. 4, next page). Other card condition display messages: "Total" indicates the carte's
retention is total, with no remaining room to store files (see below). "Err" means in that location is a carte du jour reading error (endeavor a dissimilar SD carte du jour). - Formatting the SD card before using it for the first time is recommended, especially when a card has been used in other devices. This tin can be washed using the camera'due south "Format" function (pg. 8, "SD Bill of fare Format"). Make sure
you have backed upwardly (saved to your computer) whatsoever files y'all desire to go along on a previously used card, equally formatting erases ALL files. - To take out the SD carte du jour, just gently push in the bill of fare (practice not try to pull it out without pushing in first). The card is released from the slot and ready to be removed when yous hear the click. Exist sure the camera'southward ability is switched OFF before removing or inserting SD cards.
SETUP Style
Once batteries are installed and an SD carte is inserted, yous're ready to go into the Setup Manner to become the camera fix to use, with all options set to your preferences. While this can be done in the field (no computer or net admission is needed), most
users volition likely desire to setup the photographic camera at home, in advance. At that place are only a few settings to make, and then the process is quick and easy. To start setting upwards your Tasco Trail Camera:
- To enter Setup Manner, movement the Power Switch to the middle (AIM) position (Fig. ane). The display will come on and testify the initial Setup screen (Fig. v). Notation: Don't worry if you find the STATUS LED flashing during the
Setup procedure-this is normal, as the AIM position of the switch has a second role that volition be covered afterward in this manual. - Printing the OK key to begin. When the display flashes, yous tin utilise the Up and Down keys to change the setting of the currently selected option or item.
- When y'all finish changing a setting (or leaving it set "as is"), press OK to lock in the setting and movement on to the next option/item. If in that location is a setting that you don't need or want to change from the default or electric current setting, simply
printing OK to ostend and skip to the next item/option. Once yous go through the Setup Mode items and alter a few settings, you lot'll quickly encounter how this works.
SETUP MODE
Setting Time and Engagement (Fig. 6)
After the Initial Setup screen, the side by side few display screens volition allow y'all to set up the current time and date, and so the time/date stamp imprinted on all your photos and videos volition be accurate when captured by the camera. To change the Time and Date to exist current, starting at the default "12 : 00" screen (encounter Fig. 6):
- Press OK and utilise UP/DOWN to set the hour (24 hr/ armed forces time format). Press OK to confirm.
- Apply Upwardly/Downwards to set the minute. Press OK to ostend.
- Utilize Upwards/Down to set the month. Press OK to confirm.
- Utilise UP/DOWN to set the engagement. Printing OK to confirm.
- Use Upwards/DOWN to set the twelvemonth. Press OK to ostend and movement on to the next Setup item, Interval Time.
Setting Interval (Detection Delay) Time (Fig. 7)
The Interval or Detection Delay option lets you set the time between captured images when an animal remains within the camera'southward sensor range after information technology is kickoff detected and the camera is triggered. Apply Upwards/Down to select 5 sec (brandish shows "00:05"), 15 sec (default value), thirty sec, 1 min (brandish shows "01:00") or 5 min. Press OK after setting.
Setting Capture Mode (1 photo, three photos, or video) (Fig. eight)
Use Upward/Downward to select your preferred prototype capture mode: Single Photo per trigger (display shows 1 + a still photographic camera icon), Rapid Sequence of 3 Photos per trigger (display shows a all the same camera icon + 3) or Video Clips that are ten seconds long at 720p resolution (display shows a picture show camera icon). Printing OK afterward setting.
Setting Camera ID# (if using multiple cameras) (Fig. nine)
Use Upwards/Downwards to select a reference ID# (from "01" to "99") for this camera, which will be imprinted on all photos/videos along with the time & date. If you lot are only using a unmarried camera to monitor an area, only exit it set to the default "Id : 01". Gear up a second photographic camera that volition exist used in a grouping of multiple cameras
to "02", etc. Press OK after setting.
SD Card Format (delete all files) (Fig. 10)
The display will show "FOrN" (meet Fig. 11). Caution: be certain to backup and salvage any/all files you want to keep first, as formatting will articulate the card completely of all files-they will then be difficult or impossible to recover from the menu.
If you are sure you desire to format a previously used card, use Upward/DOWN to change the "N" after "FOr_" to "Y" (Aye), and so printing OK to confirm and delete all files from the carte.
Restore Default Settings (initialize photographic camera setup) (Fig. 11)
The display will testify "dEFN" (see Fig. 12). To return the Interval, Capture Way, and Photographic camera ID# to their original, "factory default" settings, use Upwards/Downwardly to modify the "North" later on "dEF_" to "Y" (Yep), and then printing OK to ostend. Annotation: your
time and appointment settings and photographic camera ID# volition not be changed from their current settings to the original defaults, and your SD carte du jour will not be formatted. Simply the Interval and Capture Style settings will be restored to their defaults.
MOUNTING AND AIMING THE CAMERA
Mounting
After setting the camera's fourth dimension/appointment and other options to your preferences, you're ready to have it exterior and begin capturing images of animals in the area you desire to monitor. When setting up the Tasco Trail Camera for scouting game or other
outdoor applications, y'all must be sure to mount information technology in place correctly and deeply. We recommend mounting the Tasco Trail Photographic camera on a sturdy tree with a diameter of about 6 inches. To get the optimal moving-picture show quality, the tree should exist about sixteen-17 ft. abroad from the identify to be monitored, with the camera placed at a top of 2.five-
3.5 ft. Besides, keep in mind that yous volition get the best results at night when the
subject is within the ideal wink range, no further than forty ft. and no closer than 10 ft. from the camera.
At that place are 2 ways to mountain the Tasco Trail Camera: using the provided adaptable web belt, or the tripod socket.
Using the adjustable web chugalug: Push ane terminate of the belt through the 2 brackets on the dorsum of the Tasco Trail Photographic camera (Fig. 12). Thread the end of the strap through the buckle. Fasten the chugalug deeply around the tree trunk by
pulling the cease of the strap firmly so there is no slack left.
Note: it is not possible to use a cable lock (in the upper part of the bracket) and the web chugalug at the same time.
Using the tripod socket: The photographic camera is equipped with a socket at the bottom end to enable mounting on a tripod or other mounting accessories that use a standard1/4-20 thread.
Sensing Angle and Distance Exam
To test whether the Tasco Trail Camera tin can effectively monitor the area you choose, this examination is recommended to check the sensing bending and monitoring distance of the Tasco Trail Camera. To perform the test:
- Switch the camera's Ability Switch to AIM. You can ignore the Setup brandish, no demand to change any settings (provided you already ready the time/date and other Setup Way options in accelerate).
- Make movements in front of the camera at several positions within the area where you lot expect the game or subjects to be. Try different distances and angles from the camera.
- If the AIM/Status LED (Fig. ane) blinks, information technology indicates that position can be sensed. If it does not blink, that position is exterior of the sensing area.
The results of your testing volition aid you lot find the best placement when mounting and aiming the Tasco Trail Camera. The vertical height away from the ground for placing the device should vary with the animal size appropriately. In full general, 3 to 6 feet is preferred.
You can avoid potential fake triggers due to temperature and motion disturbances in front of the camera past not aiming it at a rut source or nearby tree branches and brush (especially on windy days).
Switching ON the Camera
Once you move the Power Switch to ON, the AIM/Status LED will blink for several seconds. This gives y'all fourth dimension to close and lock the front comprehend of the Tasco Trail Photographic camera so walk abroad. During this time, the AIM/Status LED will blink
continuously.
After it stops blinking, the PIR sensor is active, and any motion that is detected by it will trigger the capture of photos or videos equally programmed in Setup Style. Be sure you lot accept read the camera Setup Fashion section. Delight note, the PIR is strongly sensitive to ambient temperature. The greater the temperature difference between the environment and your field of study, the further the possible sensing altitude.
Before leaving the camera unattended, delight bank check for the following:
- Are the batteries inserted with correct polarity and is their power level sufficient?
- Does the SD card have sufficient available space and is its write-protection (lock) switch off?
- Is the Power switch in the ON position? (do not leave information technology set to AIM).
SAVING/VIEWING THE FILES ON YOUR Figurer
After you lot have setup, mounted and activated your Tasco Trail Camera, you lot volition of class be eager to return afterwards and review the images information technology has captured for you lot. The best way to do this is to switch the camera OFF and remove the SD menu and then you tin can take it home to download and review your photos/videos at leisure.
To continue using the camera, simply insert some other SD carte du jour (format it first in the Setup Manner menu if necessary, after making sure you lot take backed upward whatsoever files you lot desire to go on that are left on a previously used card) and switch the camera back ON. The fourth dimension/date and other settings fabricated in Setup Mode will remain unchanged as long equally the batteries remain in the camera and provide acceptable power for information technology to operate.
Downloading and Reviewing Files From the SD Card
Insert the SD card you lot removed from your camera into the SD bill of fare slot of your computer if information technology has one, or the SD slot of a USB carte reader accessory (follow the directions provided by the manufacturer).
Depending on the estimator'south operating organisation, the SD card'south icon and name volition and then be visible on your desktop, under "Devices with Removable Storage" in "My Figurer" or in a list of drives and connected devices. Double click the SD card or card reader's icon to open up it and view the file names (yous may need to open an additional folder or ii within the first level).
Note: some computers and operating systems may automatically launch a popular-upwards window that lets you view or salvage the photos/videos on the card soon after it'south inserted.
Alternatively, you tin connect a uniform USB cable (not included) to the USB port on the correct side of the photographic camera (Fig. 13) to your computer-this is less convenient every bit it requires removing the camera from the tree. The camera and so effectively becomes an SD carte du jour reader (USB "mass storage device") and can be used as described above.
If the SD bill of fare is non recognized past the computer after 30 seconds (with the carte in the photographic camera), effort switching the camera to ON or using a unlike USB port on the reckoner (not an unpowered USB hub). Note: the mini plug jack next to the USB port is for factory service and diagnostic usage just. Do not connect any device to it.
Each new image or video will be numbered incrementally in social club of the time it was captured. For example, you volition see file names such as "00000001.JPG" or "00000001.AVI". Through the file format suffix y'all can distinguish whether the file is a still photo (with suffix .jpg) or a video (with suffix .avi).
Your computer should have the option of allowing you to view the files every bit preview images instead of file names/types (Windows: More Options>Minor to Large Icons, Mac: View>as Icons). Double clicking any individual file volition let yous view the photo or video full screen within whatever application is associated with that file format.
Select any/all files you want to backup and elevate or copy/paste them to your computer's hard drive wherever you unremarkably keep photos and videos. You may want to create a new folder named "Tasco Trail Cam" or another specific title to go on them separate from family photos, etc. Once the menu's files have been backed
upward, you lot can delete any that you make up one's mind non to keep.
The aforementioned carte can then be returned to your Tasco Trail Photographic camera for future utilize. Use the format characteristic in Setup Mode to erase the entire carte du jour if you want to have its full capacity bachelor to shop as many images as possible before information technology becomes full and
yous need to go through this remove > download > backup > format > reuse process over again. Using higher capacity cards and/ or swapping out multiple cards will allow you lot to do this less ofttimes.
TROUBLESHOOTING / FAQ
Camera takes continuous images of no subject area A camera has what is known every bit a "fake trigger" if the PIR sensor thinks that at that place is motion and rut in front end of the camera lens when there is no subject field in the paradigm. These "Fake Triggers"
are the result of placing the camera in an environs where in that location is motility associated with tree branches creating motility in front of the camera or an area where there is loftier oestrus in the foreground and any motility from wind could set off the camera. Setting a photographic camera upwards over water is too a potential cause for this effect. To remedy this situation:
- Try moving the photographic camera to an surface area that does not have whatsoever of these problems or remove potential obstacles near the lens if possible.
- If the camera continues to have images when there is no subject in them, examination the camera by placing it in an inside environment and aiming at a location where there is no move.
- If the camera continues to take images with no subject, then there is probably an electronic component issue. If this is the case, delight contact Tasco client service to send the camera dorsum for repair.
Bombardment life is shorter than expected
- Bombardment life will vary with operating temperature and the number of images taken over time. Typically, the Tasco Trail Camera will be able to capture several thousand images before the batteries die.
- Check to make sure yous accept used new alkaline or lithium batteries. Tasco recommends using a full set of eight Energizer® Lithium AA batteries to obtain maximum battery life.
- Make sure that the power switch was turned to the ON position and that the camera was non left switched to AIM (Setup style) while in the field.
- Make sure that y'all are using a adept quality proper name brand SD card in your camera. Tasco recommends SanDisk® brand SD Cards up to 32GB. Our feel indicates that poor quality SD cards can sometimes reduce your
Tasco Trail Photographic camera battery life.
Camera stops taking images or won't take images
- Please make sure that the SD menu is not total. If the card is full (display indicates "FULL", the camera volition terminate taking images.
- Check the batteries to make sure that they are new alkaline or lithium AA batteries. Meet note above about brusque battery life.
- Make sure that the Ability/Fashion Switch is in the ON position and not ready to OFF or AIM.
- Make sure that you are using a good quality SD card in your camera. Tasco recommends SanDisk® SD Cards up to 32GB.
- If the SD card has its write protect switch in the lock position, the camera volition not take images.
- If you have used an SD card in another device before inserting it in your Tasco Trail Camera, y'all might want to endeavor formatting the card using the "Format" option in Setup Mode (pg. eight). Make certain you take backed up any important files first, as formatting will erase all previous files. In some cases, other devices may change the formatting of the SD menu so that it will not work properly with the Tasco Trail Camera.
Camera won't ability up
- Brand sure that yous have installed all batteries in the battery compartment, filling all battery spaces with no "gaps". Note-the camera may exist operated with merely 4 batteries if necessary, but they will need to be changed more frequently.
- Tasco recommends using a full set of 8 Energizer® Lithium AA batteries.
- Make sure that the batteries are installed correctly, observing proper polarity. Ever place the negative (apartment) end of each bombardment in contact with the spring side of its slot within the camera.
- Afterward moving the switch from "OFF" to "AIM" or "ON", make sure that the switch is correctly in position to ensure the proper mode (avoid positions "between" two modes).
- Do not motility the switch directly from "ON" to "AIM"- ever motion the switch all the way downward to "OFF" start, and then back up to "AIM".
Yet Photo and/or Video Quality Problems
- Night photos or videos announced too dark
a) Bank check the battery indicator icon to see if battery power is full. The flash volition stop operating almost the end of the battery life.
b) You lot will become the all-time results when the subject is inside the platonic flash range, no farther than 40 feet from the photographic camera. Subjects may appear too nighttime at greater distances.
c) Please note that when the camera is set for a rapid sequence (burst) or three Photos, or with very short Interval settings, some images may appear darker than others due to the quick response and rapid retriggering of the photographic camera, allowing less time for the flash to fully recharge before firing again. - Daytime photos or videos appear too dark
a) Make sure that the camera is not aimed at the sun or other light sources during the mean solar day, as this may crusade the car exposure to produce darker results. - Night photos or videos appear too vivid
a) You will go the all-time results when the field of study is inside the ideal flash range, no closer than 10' (3m) from the camera. Subjects may appear too light at closer distances. - Daytime photos or videos appear likewise vivid/dark
a) Make sure that the camera is non aimed at the sun or other light sources during the twenty-four hour period. - Red, greenish or blue color cast
a) Under certain lighting conditions, the sensor can become confused resulting in poor colour images.
b). If this is seen on a consistent ground, and so the sensor may need servicing. Please contact Tasco customer service. - Video clips are too short/end prematurely
a) Check to brand certain that the SD card is not full (brandish reads Full).
b) Make sure that the camera has expert batteries in it.
c) Maximum length of videos is 10 seconds per clip to aid ensure long battery life.
Appointment/Fourth dimension Stamp on images is not correct
- Make sure that yous set the current time/date in Setup Mode (pg. eight).
- Check that the batteries still take adequate power levels. Always replace all batteries at the same time.
Photos Practise Not Capture Discipline of Interest
- Try to set your photographic camera up in an area where there is non a oestrus source in the photographic camera'south line of sight.
- In some cases, setting the camera near water will brand the camera take images with no subject in them. Effort aiming the camera over footing.
- Try to avoid setting the photographic camera up on small copse that are prone to existence moved past strong winds.
- Remove any limbs which are right in front of the camera
lens.
AIM/Condition LED Flashes/Doesn't Flash
- When the photographic camera's Power Switch is set to AIM (Setup Manner), an AIM/Status LED on the front of the camera volition flash when information technology senses motion. This is for setup purposes only and volition help the user position and aim the camera to check the area of detection/coverage.
- During employ, the LED will not flash when the camera takes an image. This is to assistance keep the camera subconscious from game.
LCD Screen Problems
- LCD screen powers on but no text is present.
a) After moving the Power Switch from OFF to AIM or ON" make sure that the switch is correctly in position to ensure the proper way (avoid positions "between" ii modes).
b) Do not motion the switch directly from ON to AIMalways motion the switch all the way downwardly to OFF first, then back up to AIM.
Camera won't retain settings
Make sure that you have been saving the changes to any settings that yous fabricated while in Setup Mode, by pressing the OK central after irresolute the setting. If you don't save your new setting after irresolute it, the camera will continue to utilise the original default setting for that item/ pick.
TECHNICAL SPECIFICATIONS
ONE Twelvemonth LIMITED WARRANTY
Your Tasco production is warranted to exist gratuitous of defects in materials and workmanship for one twelvemonth after the date of purchase. In the event of a defect under this warranty, nosotros will, at our pick, repair or supplant the product, provided that you lot return the production postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Tasco Authorized Service Section.
Any return made under this warranty must be accompanied past the items listed below:
- A check/money guild in the amount of $10.00 to comprehend the cost of postage and handling.
- Name, address and daytime phone # for product return.
- An explanation of the defect.
- Re-create of your dated proof of buy.
- Do not send in accessories (batteries, SD cards, cables), only the
product for repair. Production should be well packed in a sturdy outside shipping carton to preclude damage in transit, and shipped to the address listed below:
IN U.S.A. Send To:
Tasco
Attn.: Repairs
9200 Cody
Overland Park, Kansas 66214
IN CANADA Transport To:
Tasco
Attn.: Repairs
140 Great Gulf Drive, Unit # B
Vaughan, Ontario L4K 5W5
For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information.
In Europe you may also contact Tasco at: Tasco Germany GmbH
European Service Heart
Mathias-Brüggen-Str. lxxx
D-50827 Köln
Deutschland
Tel: +49 221 995568-0
Fax: +49 221 995568-20
This warranty gives you specific legal rights.
You may have other rights which vary from country to country.
FCC Compliance Statement
This equipment has been tested and institute to comply with the limits for a Class B digital device, pursuant to function 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Functioning is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must have whatever interference received, including interference that may crusade undesired operation.
This equipment generates, uses and tin radiate radio frequency energy and, if not installed and used in accordance with the instructions, may crusade harmful interference to radio communications. However, at that place is no guarantee that interference will not occur in a detail installation.
If this equipment does crusade harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to endeavour to correct the interference by i or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device does not contain whatsoever user-serviceable parts. Repairs should only be made by an Authorized Bushnell repair center. Unauthorized repairs or modifications could result in permanent damage to the equipment, and will void your warranty and your authority to operate this device under Part 15 regulations.
The shielded interface cable which is provided must be used with the equipment in lodge to comply with the limits for a digital device pursuant to
Subpart B of Function 15 of FCC Rules.
For further questions or boosted information please contact:
TASCO
9200 Cody
Overland Park, KS 66214
1-800-423-3537
www.tasco.com
Read More Virtually This User Manuals…
Tasco-Trail-Photographic camera-Education-Manual-Optimized.pdf
Tasco-Trail-Camera-Instruction-Manual-Orginal.pdf
Where Can I Download Software for Tasco Trail Cameras
DOWNLOAD HERE
Source: https://manuals.plus/tasco/tasco-trail-camera-instruction-manual-119270cw-119271cw
Posted by: jeffreywhomplies.blogspot.com